3 in 1 Mould Killer
Description
Fast-acting and kills mould on contact, all you need to do is spray it on and wipe it off. 3 in 1 Mould Killer is suitable for bare or previously painted walled and ceilings.
Product Safety
Danger 
- Causes skin irritation
- Causes serious eye irritation
- Harmful to aquatic life with long lasting effects
Product features
- Eliminates mould and protects against regrowth
- Perfect for heavy duty cleaning
- Immediately ready for use
- Powerful and fast-acting
- Contains biocides to stop mould growing
Technical specification
| Usage | Suitable for use on bare or previously painted walls & ceilings where mould is present |
| Durability | Kills mould and prevents it from returning |
| Application | Available in a bottle or spray |
| Sizes | 500ml |
| VOC | Low |
Product Safety
|
Danger
|
|
|
Hazard Statements |
|
|
Precautionary Statements |
Read carefully and follow all instructions. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Wear protective gloves and eye or face protection. Wash hands thoroughly after handling.
IF IN EYES: Rinse cautiously with water for several minutes. Immediately call a POISON CENTER or doctor. Dispose of contents and container in accordance with all local, regional, national and international regulations.
Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Always follow the information on the product label. |
|
Hazardous Ingredients |
Ethoxylated Alcohol, C6-C11, Chlorinated Quaternary Ammonium Salt |
|
Supplier |
Sherwin-Williams UK Limited |
|
Supplier Contact Details |
Avenue One Station Lane Witney Oxfordshire United Kingdom OX28 4XR +44 (0) 344 736174 uksds@sherwin.com |
Use on...
Test the mould killer on a small patch of your wall or ceiling to check the compatibility.
Wear gloves to protect your hands.
- Squeeze the trigger to break the tamper seal.
- Squeeze the trigger several times, applying the spray directly to the surface to ensure it’s wetted thoroughly.
- Leave for five minutes and use a damp cloth or sponge to wipe down the surface and remove the mould.
- Once the mould has been removed, wipe off any residual mess or grime with a clean damp cloth.
Take the suitable precautions to ensure mould does not reappear. Make sure rooms are well ventilated and use an extractor fan, or open windows when showering, bathing or cooking.
For more information on removing mould and preventing damp, read our guide.
Cleaning
Cloths and sponges can be rinsed in warm soapy water.
When using our Mould Killer Spray you can paint over as soon as the surface is dry. This will vary from job to job depending on how much spray has been used and the temperature of the room.